The motor is the power source of the self loading mixer, and the quality of the motor also determines whether the mixer can work for a long time. Maybe you encounter the motor heating when using the self loading mixer. Yes, that's right. After working for a long time, the motor will also dissipate heat and generate heating. In addition, the serious heating of the motor after the use of the self loading mixer is mainly caused by the following two reasons:

一、電機繞組熱量散發多，沒能及時通過外殼散發掉。

1、 The heat of the motor winding is dissipated too much and cannot be dissipated through the shell in time.

二、電機外殼散發熱量的能力較差。

2、 The ability of the motor shell to dissipate heat is poor.

這兩種因素都可能造成自上料攪拌車的電機熱量太大而導致電機被燒毀。這兩種因素造成電機過熱其根本原因在于：

These two factors may cause too much heat from the motor of the charging mixer and cause the motor to be burned. These two factors cause motor overheating. The root causes are:

一、自上料攪拌車電機繞組產熱太多，其根本問題是在于電機導線非純銅導線所導致的，純銅導線導電能力強，電阻小，因此產熱少，如果其他材質導線電機工作時電阻大產熱多；

1、 The motor winding of the self feeding mixer produces too much heat. The fundamental problem is that the motor conductor is not a pure copper conductor. The pure copper conductor has strong conductivity and low resistance, so it produces less heat. If the conductor of other materials has high resistance when the motor works, it produces more heat;

二、自上料攪拌車作業后電機外殼散熱的能力差，根本問題在于外殼是非純鋁材質。合金鋁不但質量輕，而且散熱的能力更強，采用其他材質作為電機外殼，散熱的能力不如鋁材質。

2、 Since the operation of the feeding mixer, the heat dissipation capacity of the motor shell is poor. The fundamental problem is that the shell is made of non pure aluminum. Aluminum alloy not only has light weight, but also has stronger heat dissipation capacity. Using other materials as motor shell, the heat dissipation capacity is not as good as aluminum.

本文由全自動自上料攪拌車為您提供，我們的網站是：http://www.kunapops.com/我們將以全心全意的熱情為您提供服務，歡迎您的訪問

This article is provided for you by the automatic self loading mixer. Our website is: http://www.kunapops.com/ We will serve you with wholehearted enthusiasm. Welcome to visit