由于現在農村建設發展快，人們對自上料混凝土攪拌罐車的需求不斷增加。大型混凝土自動上料攪拌車造價高、維修費用高，因此在建設中自上料混凝土攪拌罐車成逐步增加趨勢。今天小編給大家講解的是自上料混凝土攪拌罐車的使用要點，下面一起來看看吧！

Due to the rapid development of rural construction, the demand for self feeding concrete mixer trucks is constantly increasing. The cost and maintenance cost of large-scale automatic concrete loading and mixing trucks are high, so the trend of self loading concrete mixing tank trucks is gradually increasing in construction. Today, the editor will explain the key points for using self feeding concrete mixer trucks. Let's take a look together!

1.液壓驅動系統：液壓系統是攪拌車的核心系統。為保證攪拌車能正常工作，攪拌罐能運轉正常，必須在每次車輛發動前檢查油路散熱器和減速機的液壓油位，保證油位指示在視窗范圍內。同時要保證其清潔性，以免塵粒和水分等污染系統液壓油，造成系統不能正常工作或損壞。

1. Hydraulic drive system: The hydraulic system is the core system of the mixer truck. To ensure the normal operation of the mixing truck and the mixing tank, it is necessary to check the hydraulic oil level of the oil radiator and gearbox before each vehicle start to ensure that the oil level indicator is within the window range. At the same time, it is necessary to ensure its cleanliness to prevent dust particles and moisture from contaminating the hydraulic oil of the system, causing it to malfunction or damage.

2.供水系統：氣壓供水系統加水量一般在水箱的四分之三處為宜；車輛在行駛時水路系統中各個閥門均應處于關閉狀態，以免影響車輛的制動性能，或燒結摩擦片，從而影響車輛的制動性能。

2. Water supply system: The recommended amount of water for a pneumatic water supply system is generally three-quarters of the water tank; All valves in the waterway system of the vehicle should be in a closed state when driving to avoid affecting the braking performance of the vehicle or sintering friction plates, thereby affecting the braking performance of the vehicle.

禁止隨意焊接和改動水箱，避免重物撞擊；經常檢查閥體是否堵塞或是否有工作異常；在有結冰可能的環境中使用時，供水系統必須排空存水，防止管路凍裂；經常檢查系統的密封性，拆卸修理后，關鍵部位要涂螺紋密封膠。

It is prohibited to weld or modify the water tank at will to avoid heavy objects hitting it; Regularly inspect the valve body for blockages or abnormal operation; When used in environments with the possibility of freezing, the water supply system must empty the stored water to prevent pipeline freezing and cracking; Regularly check the sealing of the system, and after disassembly and repair, apply thread sealant to key parts.

3.攪拌筒：初次使用50h要及時檢查罐體及其他部位螺栓是否有松動，每天行車前要檢查托輪與滾道的潤滑，每個月打開一次托輪護罩，清理內部的油污并添加潤滑油脂。

3. Mixing drum: After the first 50 hours of use, it is necessary to promptly check whether the bolts on the tank and other parts are loose. Before driving every day, the lubrication of the supporting rollers and raceways should be checked. The protective cover of the supporting rollers should be opened once a month to clean the internal oil stains and add lubricating grease.

此外自上料混凝土攪拌罐車如果沒有及時保養維修，再者或許是因為沒有正確的保養，就會出現一定的問題，要做到如下：

In addition, if the self feeding concrete mixing tank truck is not maintained and repaired in a timely manner, or perhaps due to incorrect maintenance, certain problems may occur. The following measures should be taken:

1、忌機油只加不換

1. Avoid adding oil without changing it

2、混凝土商砼車忌缸套和活塞新品不經選配即安裝

2. Concrete truck operators should avoid installing cylinder liners and pistons without selecting new products

3、水泥運輸車忌不檢查柱塞行程余量

3. Cement transport vehicles should avoid not checking the plunger stroke allowance

自上料混凝土攪拌罐車在保養時也要會保養才可以，錯誤的保養方法不僅會使設備的質量有所下降，嚴重的可能會損壞某些零件，這在很大程度上降低了它的使用壽命，那么希望通過今天的學習，大家在日后的保養時一定要注意，千萬不要犯同樣的錯誤。更多相關內容就來我們網站http://www.kunapops.com咨詢吧！

The self feeding concrete mixing tank truck also needs to be maintained during maintenance. Incorrect maintenance methods not only reduce the quality of the equipment, but may even damage certain parts, greatly reducing its service life. Therefore, through today's learning, everyone must pay attention to future maintenance and never make the same mistake. For more related content, come to our website http://www.kunapops.com Consult!