攪拌車正確清洗步驟：
Correct cleaning steps of mixer truck:
由于混凝土會在短時間內凝固成硬塊，且對挖機攪拌車的鋼材和油漆有一定的腐蝕性，所以每次使用混凝土貯罐后，洗凈粘附在混凝土貯罐及進出料口上的混凝土是每日維護一定要認真進行的工作。其中包括：
As the concrete will solidify into hard blocks in a short time, and has a certain corrosivity to the steel and paint of the excavator mixer, after each use of the concrete storage tank, cleaning the concrete adhered to the concrete storage tank and the inlet and outlet is a daily maintenance work that must be carefully carried out. These include:

a．每次裝料前用水沖洗進料口，使進料口在裝料時保持濕潤；
a. Flush the feed inlet with water before each loading to keep it wet during loading;
b．在裝料的同時向隨車自帶的清洗用水水箱中注滿水；
b. At the same time of loading, fill the water tank with water for cleaning;
c．裝料后沖洗進料口，洗凈進料口附近殘留的混凝土；
c. Flush the feed inlet after loading, and clean the residual concrete near the feed inlet;
d．到工地卸料后，沖洗出料槽，然后向混凝土貯罐內加清洗用水30—40L；在車輛回程時保持混凝土貯罐正向慢速轉動；
d. After unloading at the construction site, flush the discharge chute, and then add 30-40L of cleaning water to the concrete storage tank; Keep the concrete tank rotating slowly in the forward direction during the vehicle return;
e．下次裝料前切記放掉混凝土貯罐內的污水；
e. Remember to drain the sewage in the concrete storage tank before the next loading;
f．每天收工時徹底清洗混凝土貯罐及進出料口周圍，保證不粘有水泥及混凝土結塊。
f. At the end of each day, thoroughly clean the concrete storage tank and around the inlet and outlet to ensure that there is no cement and concrete caking.
以上這些工作只要一次不認真進行，就會給以后的工作帶來很大的麻煩。
If the above work is not carried out seriously once, it will bring great trouble to the future work.
以上就是為大家介紹的有自動上料混凝土攪拌車的詳細的介紹,希望對您有所幫助.如果您有什么疑問的話,歡迎聯系我們.我們將以的態度,為您提供服務http://www.kunapops.com
The above is a detailed introduction to the automatic concrete mixer, and I hope it will be helpful to you. If you have any questions, please contact us. We will provide you with professional services http://www.kunapops.com/